PGYTECH SUCTION CUP 피지테크 석션 컵

WARNING 내용을 옮겨봅니다. 한국어가 없어서 번역.

1. only adsorbed on a smooth, flat.

non suitable surface:
a. coating surface
b. natural marble surface
c. old tile surface
d. breathable wallpaper
e. diatom mud wall
f. unpainted wood surface
g. frosted glass surface
h. other rough or breathable material surface

부드럽고 평평한 표면에만 흡착됩니다.

적합하지 않은 표면:
a. 코팅 표면
b. 천연 대리석 표면
c. 오래된 타일 표면
d. 통기성 벽지
e. 규조 진흙 벽
f. 도색되지 않은 나무 표면
g. 젖빛 유리 표면
h. 기타 거칠거나 통기성이 있는 재료 표면

2. When using this product to be adsorbed on the outside of vehicles such as automobiles and motorcycles, this product is only used on flat roads. Please make sure that the product adsorption area is smooth and flat, and the speed is strictly controlled below 80km/h. if conditions permit, it is recommended to use a safety rope to avoid accidents.

2. 본 제품을 자동차, 오토바이 등 차량 외부에 흡착하여 사용할 경우에는 평지에서만 사용하십시오. 제품 흡착 영역이 매끄럽고 평평한지 확인하고 속도를 80km/h 이하로 엄격하게 제어하십시오. 상황이 허락하는 경우 사고를 방지하기 위해 안전 로프를 사용하는 것이 좋습니다.

3. Not recommended for surfing, skiing or other high impact sports. This product is only suitable for non-impact activities.

3. 서핑, 스키 또는 기타 고강도 스포츠에는 권장하지 않습니다. 이 제품은 충격이 없는 활동에만 적합합니다.

4. Please take note of the instruction for the correct detachment of your Suction Cup Mount. Damage caused by unusual use is not under warranty.

4. 석션 컵 마운트의 올바른 분리를 위한 지침을 확인하십시오. 비정상적인 사용으로 인한 손상은 보증 대상이 아닙니다.

Recommended ambient operating temperature range : -10 ~ 40℃. When not in use, please do not engage the buckle to prevent damage to the perfomance of the action camera suction cup. Note : Static load should not exceed 300g.

권장 사용 주위 온도 범위: -10 ~ 40℃. 사용하지 않을 때는 액션 카메라 흡입 컵의 성능이 손상되지 않도록 버클을 잠그지 마십시오. 참고 : 정적 하중은 300g을 초과해서는 안됩니다.